View STK392-110_406352.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN5170
Thick Film Hybrid IC
STK392-110
3-Channel Convergence Correction Circuit (IC max = 3A)
Overview
The STK392-110 is a convergence correction circuit IC for video projectors. It incorporates three output amplifiers in a single package, making possible the construction of CRT horizontal and vertical convergence correction output circuits for each of the RGB colors using ust two hybrid ICs. The output circuit use a class-B configuration, in comparison with the STK392-010, realizing a more compact package and lower cost.
Package Dimensions
unit:mm 4083
[STK392-110]
64.0 55.6 8.5
* Video projectors
1 18 2.54 17x2.54=43.18 0.5
4.0
16.5
25.8
Applications Features
* 3 output amplifier circuits in a single package * High maximum supply voltage (VCC max = 38V) * Low thermal resistance (j-c=3.0C/W) * High temperature stability (TC max=125C) * Separate predriver and output stage supplies * Output stage supply switching for high-performance designs * Low inrush current when power is applied
21.0
31.0
3.6
2.9 0.4 5.5
(6.21)
SANYO : SIP18
Series Organization
The following devices form a series with varying output capacity and application grade. Some of the devices below are under development, so contact your nearest sales representative for details.
Type No. STK392-110 STK392-010 STK392-020 STK392-040 STK392-210 STK392-220 Maximum ratings VCC max 38V 38V 44V 50V 65V 75V IC max 3A 5A 6A 7A 8A 10A j-c Maximum horizontal frequency fH max 15kHz 15kHz 35kHz 100kHz 130kHz 160kHz Application grade General projection TVs General projection TVs HD, VGA XGA, CAD, CAM CAD, CAM CAD, CAM
3.0C/W 2.6C/W 2.1C/W 1.8C/W 1.5C/W 1.3C/W
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
93099TH (KT)/80995HA (ID) No.5170-1/4
STK392-110 Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Maximum collector current Thermal resistance Junction temperature Operating temperature Storage temperature Symbol VCC max IC j-c Tj Tc Tstg Tr6, 7, 13, 14, 20, 21 Tr6, 7, 13, 14, 20, 21 (per transistor) Conditions Ratings 38 3.0 3.0 150 125 -30 to +125 Unit V A
C/W C C C
Operating Characteristics at Ta = 25C, Rg=50, VCC=30V, specified test circuit
Parameter Output noise voltage Quiescent current Neutral voltage Output delay time Symbol VNO ICCO VN tD f=15.75kHz, triangular wave input, VOUT=1.5Vp-p Conditions Ratings min 15 -50 typ 22 0 max 30 +50 1 Unit
0.2 mVrms mA mV s
Note : All tests are conducted using a constant-voltage regulated supply unless otherwise specified. The output noise voltage is the peak value of an average-reading meter with an rms value scale (VTVM).
Block Diagram
No.5170-2/4
STK392-110
Equivalent Circuit
Test Circuit
No.5170-3/4
STK392-110
Sample Application Circuit
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of September, 1999. Specifications and information herein are subject to change without notice.
PS No.5170-4/4

▲Up To Search▲

Price & Availability of STK392-110

	To Download STK392-110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .